How to access your computer that’s behind a router remotely via Remote Desktop (advanced)
Would you like to access your computer remotely via Remote Desktop, and the computer you want to access is behind a router at home or work? You’re not going to be able to access it by entering the name of the computer. You will have to enter an IP address and set up your router to forward a port.
Which IP address, which port, and how?
First, to set up your computer for a Remote Desktop Connection, go here:
http://www.microsoft.com/windowsXp/using/mobility/getstarted/Remoteintro.mspx
After you do that, come back here and follow the instructions below. This is for advanced users, btw. Sorry, but there are too many modems and routers out there to make it beneficial to be any more detailed that I am.
1)Know you external IP (you’ll have to log into either your router or modem to get this)
2)Set a static IP on the machine you wish to RDP in to
3)Set up the NAT/Port Forwarding for the default RDP port 3389 on your router if you have one and your modem if you do not (since each router and modem is different, call either the manufacturer of your router if you have a router, or your Internet Service Provider if you just have a modem and have them walk you through this)
4)Disable or configure Firewall
5)Make sure the computer is configured to accept remote requests and allow control (see link above)
6)Try to log in from a computer that is on a different network
Leave a Comment